Click above to get retro games delivered to your door ever month! RELATIVE ARC THREE POINT , ( RT ) The RT command draws an arc segment, using relative coordinates, from a starting point through an intermediate point to an end point. For more information see the PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] Esc} in DOS EDIT EcE Resets the Printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1 (black). Even though there is no physical pen, the SP command must be used to enable printing. PA1000,100; Specifies the absolute point (1000,100) as the starting location of the plot. PR;PD1500,0; Specifies relative plotting, pen down, and draws a line (1500,0) relative plotter units from the current pen location of (1000,100). PU-1850,1050;PD350,0; Lifts the pen, moves to (- 1850,1050) in relative coordinates, places the pen down, and draws a line 350 plu in the X direction. PU-350,-700;PD350,0; Lifts the pen, moves (- 350,-700) plu from the current location, places the pen down, and draws a line 350 plu in the X direction. PU0,-350;PD0,1500,1500,0; Lifts the pen, moves 350 plu to the left, places the pen down, draws a line 1500 plu up and then another line 1500 units to the right. RT700,-750,0,-1500; Draws an arc from the current pen position through a point (700,- 750) plu away, with an ending point (0,-1500) plu from the beginning of the arc. PU700,850;PD; Lifts the pen and moves it (700,850) plu from the current pen position; then puts the pen down. RT100,-100,0,-200; Draws an arc from the current pen position, through a point (100,- 100) plu away, to an ending point (0,-200) from the starting point of the arc. PU100,100;PD200,0; Lifts the pen and moves it (100,100) plu from the current pen position, places the pen down and draws a line 200 plu in the X direction. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.