Click above to get retro games delivered to your door ever month! CREATING A MIRROR-IMAGE For more information see the PCL5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT EcE Resets the printer. Ec%0B Enters HP-GL/2 Mode. IN; Initializes HP-GL/2 Mode. SP1; Selects pen number 1. You must use the SP command to enable printing. IP1500,3600,3000,5100; Specifies the P1/P2 locations for the first arrow figure. SC-15,15,-10,10; Sets up user scaling: (- 15,-10) to (15,10). (Subroutine) Replace (Subroutine) with the actual subroutine following this program. This subroutine will draw an arrow image on the page. IP3000,3600,1500,5100; Changes the physical locations of P1 and P2 to flip the image to the left. (Subroutine) Prints the second arrow image. IP1500,5100,3000,3600; Changes the physical locations of P1 and P2 to flip the image down. (Subroutine) Prints the third arrow image. IP3000,5100,1500,3600; Changes the physical locations of P1 and P2 to flip the image to the left and down. (Subroutine) Prints the fourth arrow image. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. SUBROUTINE TO PRINT THE ARROW IMAGE PA1,2;PD1,4,3,4,3,7,2,7, 4,9,6,7,5,7,5,4,12,4,12,5, 14,3,12,1,12,2,1,2;PU; Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.