Click above to get retro games delivered to your door ever month! DRAWING EQUAL-SIZE PICTURES ON A PAGE For more information see the PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT EcE Resets the printer. Ec&l1O Selects landscape orientation. Ec%0B Enters HP-GL/2 mode, using the default picture frame size and anchor point. IN; Initializes HP-GL/2 mode. IP500,500,5450,7500; Sets P1 to (500,500) and P2 to (5450,7500). SC0,10,0,15; Sets up user-unit scaling to range from (0,0) to (10,15). SP1; Selects pen number 1. Even though there is no physical pen, the SP command must be used to enable printing. PA0,0; Begins absolute plotting from the origin (0,0). PD10,0,10,15,0,15,0,0;PU; Pen Down and print from (0,0) to (10,0) to (10,15) to (0,15) to (0,0); then Pen Up. IP5550,500; Inputs a new P1 and allows P2 to automatically follow it. PA 0,0: Begin absolute plotting from the new origin. PD10,0,10,15,0,15,0,0;PU; Pen Down and print from (0,0) to (10,0) to (10,15) to (0,15) to (0,0); then Pen Up. Ec%0A Enters PCL Mode. EcE Resets the Printer to complete the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.