Click above to get retro games delivered to your door ever month! USING THE PEN DOWN COMMAND The Pen Down command is the basic plotting command, it puts the printer's logical pen down to enable printing. For more information see the PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT. EcE Resets the printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1, (black). Even though there is no physical pen, the SP command must be used to enable printing. PA10,10; Begins absolute plotting from coordinate (10,10). PD2500,10,10,1500,10,10; Sets the pen down and draws lines between the specified points. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.